LOWER WASTE TANK

• Open door & remove cassette or separate the 2 tanks of a portable toilet ( make sure the slide is closed before starting)

• Take the lower tank & empty into appropriate place. Use a hose or cold water gerney to wash out any remnants of waste & paper in tank.

• Add 100mls of Heavy duty BioMagic (200mls of Regular BioMagic), 3-4 drops of dishwashing liquid & stand tank on end, then fill to maximum with water. Soak for at least 8-24 hours.

• Empty & check for any remaining stubble. Hose out if need be. 

• Now set up to use by adding 100mls of BioMagic Regular for Small Waste tanks and 2 litres of water. (If using Heavy duty add 50 ml first time only)

 TOP OR FLUSH TANK

• Drain the top tank from the drain nozzle or pour out if portable tank. Fill & drain again.

• Fill up with fresh water & 50 ml of BioMagic for Small Waste tanks

• If you notice any black algae in the tank soak it for 8 hours with BioMagic, shake vigorously and empty then set up again.

 CASSETTE LOCKER

• Spray entire area inside cassette hatch and wipe thoroughly to dry.

• Never hose this area as there may be exposed timber in some vehicles.

HANDY HINTS

 When using any sort of portable toilet these golden rules are very helpful and save a lot of grief.

1. Open slide

2. Flush a little water so bowl & seals are wet

3. Use toilet

4. Flush after use

5. Close slide

It really works and removes any chance of building up uric acid in the seal area.